Skip to content
Garage Sale: Up to 70% Off Select Parts
Garage Sale: Up to 70% Off Select Parts
TeraFlex Tera44 HD Front Axle Housing W/ 5.13 R&P & ARB Locker (4-6" Lift) for 2007-2018 Jeep Wrangler - Recon Recovery

TeraFlex Tera44 HD Front Axle Housing W/ 5.13 R&P & ARB Locker (4-6" Lift) for 2007-2018 Jeep Wrangler

by TeraFlex
SKU 3543513
Availability:
In stock
$4,794.99 - $4,794.99
$4,794.99
$4,794.99 - $4,794.99
$4,794.99

Does this part fit my vehicle?

Verify

TeraFlex HD Front Axle Housings are perfect for replacing bent broken or damaged axles in JK Wrangler/Unlimited vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles- weak areas. Our Bare HD Front Axle Housings feature a heavy-duty housing with axle tubes bracketry and forged inner knuckles as well as pre-installed inner seals and upper control arm bushings. Stepping up to our Tera44 HD Front Axle Housing w/ Ring & Pinion & ARB Locker provides a choice of pre-installed ring and pinon gears ARB air locker and TeraFlex HD Ball Joints. Transfer your outer stub shafts outer knuckles and outer axle assembly (unit bearings brakes sensors) to make a complete axle assembly. Requires new inner axle shafts.

Features
  • 3.25 O.D. x 0.5" wall extreme duty axle tube increases torsional strength to resist bending
  • Asymmetric housing design for extra-long tube side strength
  • Pre-installed inner axle seals
  • HD forged inner knuckles w/ greater upper and lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Smooth radius bottom design to glide over rocks and obstacles
  • Integrated lower control arm skid plates
  • High-flow oil passages and bottom oil drain hole for simple fluid changes
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • UV protected triple-stage powder coat for corrosion resistance
  • 1/4"-thick CNC laser cut axle brackets for extreme strength
  • Integrated factory location upper control arm mount
  • Pre-installed upper control arm bushings
  • Proper pinion angle for lifted JK applications
  • 4-6" Lift features a raised pinion angle and raised track bar bracket (where applicable)
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Retains all JK ESP, ABS, and speedometer sensor capability
  • 100% engineered, designed, and built in the USA w/ new components
  • 1-Year/Unlimited Mileage Warranty
Fitment
  • 2007-2009 Jeep Wrangler — Does NOT fit: Sport, Unlimited Sport
  • 2010 Jeep Wrangler
  • 2011-2017 Jeep Wrangler — Does NOT fit: Unlimited X, X
  • 2018 Jeep Wrangler — Does NOT fit: Sport S, Unlimited Sport S, Unlimited X, X

Additional fitment notes:

  • JK Wrangler (2-door)
  • JK Wrangler Unlimited (4-door)
Specifications
  • Installation Time: 6 hours
  • Length: 60.5
  • Width: 20
  • Height: 23
  • Weight: 265.0 lbs

Warranty

Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

TeraFlex Full Suspension Systems

TeraFlex Full Suspension Systems

TeraFlex full suspension systems are complete, engineered lift solutions built specifically for vehicle. Rather than a simple spring-and-spacer lift, each system is designed as a matched package: progressive-rate coil springs, tuned shocks, control arms, track bars, sway bar links, and the brackets and hardware needed to keep geometry correct at the new ride height. The result is added ground clearance and room for larger tires without sacrificing on-road manners.

Falcon Shocks by TeraFlex

Falcon Shocks by TeraFlex

Falcon Shocks are TeraFlex’s performance shock line, engineered from the ground up for specifically for your application. Each shock is a high pressure monotube design with a large diameter body, hard-chrome piston rod, and application-specific valving tuned to the weight, geometry, and suspension travel of the vehicle it’s built for—so the damping is right out of the box, whether your ride is stock height or lifted.

The lineup scales with how you drive. Entry-level monotubes sharpen control and comfort for daily driving and light trails, mid-tier models add larger bodies and more oil capacity for sustained off-road use, and top-of-the-range piggyback-reservoir shocks offer tool-free adjustable damping—plush for the highway, firm for towing, and full performance for desert and rock terrain.

TeraFlex Brake Kits

TeraFlex Brake Kits

Bigger tires and added weight overwhelm factory brakes, so TeraFlex brake kits are engineered to restore and improve stopping power on lifted Jeep Wrangler and Gladiator models. The lineup ranges from bolt-on performance rotor and pad upgrades to complete big brake kits with oversized rotors, high-capacity calipers, and platform-specific brackets for greater clamping force and heat dissipation—plus extended braided stainless brake lines for lifted, long-travel suspensions. Every kit installs without cutting or fabrication and is built to handle off-road abuse, giving you stopping performance that matches your build, whether you’re on 35s or 40s.

SHOP ALL TeraFlex PRODUCTS

SHOP ALL TeraFlex PRODUCTS

From complete suspension systems and Falcon shocks to brake kits, control arms, and trail-ready accessories, TeraFlex builds everything your Jeep Wrangler or Gladiator needs to go further off-road. Browse the full lineup and find the right upgrade for your build.

SHOP Teraflex NOW
Description

TeraFlex HD Front Axle Housings are perfect for replacing bent broken or damaged axles in JK Wrangler/Unlimited vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles- weak areas. Our Bare HD Front Axle Housings feature a heavy-duty housing with axle tubes bracketry and forged inner knuckles as well as pre-installed inner seals and upper control arm bushings. Stepping up to our Tera44 HD Front Axle Housing w/ Ring & Pinion & ARB Locker provides a choice of pre-installed ring and pinon gears ARB air locker and TeraFlex HD Ball Joints. Transfer your outer stub shafts outer knuckles and outer axle assembly (unit bearings brakes sensors) to make a complete axle assembly. Requires new inner axle shafts.

Features
  • 3.25 O.D. x 0.5" wall extreme duty axle tube increases torsional strength to resist bending
  • Asymmetric housing design for extra-long tube side strength
  • Pre-installed inner axle seals
  • HD forged inner knuckles w/ greater upper and lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Smooth radius bottom design to glide over rocks and obstacles
  • Integrated lower control arm skid plates
  • High-flow oil passages and bottom oil drain hole for simple fluid changes
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • UV protected triple-stage powder coat for corrosion resistance
  • 1/4"-thick CNC laser cut axle brackets for extreme strength
  • Integrated factory location upper control arm mount
  • Pre-installed upper control arm bushings
  • Proper pinion angle for lifted JK applications
  • 4-6" Lift features a raised pinion angle and raised track bar bracket (where applicable)
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Retains all JK ESP, ABS, and speedometer sensor capability
  • 100% engineered, designed, and built in the USA w/ new components
  • 1-Year/Unlimited Mileage Warranty
Fitment
  • 2007-2009 Jeep Wrangler — Does NOT fit: Sport, Unlimited Sport
  • 2010 Jeep Wrangler
  • 2011-2017 Jeep Wrangler — Does NOT fit: Unlimited X, X
  • 2018 Jeep Wrangler — Does NOT fit: Sport S, Unlimited Sport S, Unlimited X, X

Additional fitment notes:

  • JK Wrangler (2-door)
  • JK Wrangler Unlimited (4-door)
Specifications
  • Installation Time: 6 hours
  • Length: 60.5
  • Width: 20
  • Height: 23
  • Weight: 265.0 lbs

 

Warranty

Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

Delivery & Shipping Time

Need Your Order Fast?

If you have an urgent order, please don’t hesitate to call, message, or email us during our business hours to check current inventory and lead times. We’re happy to help make sure your order stays on schedule! (1-800-359-9397)

We strive to ship all in-stock items within 24 hours of purchase, and in many cases, within a few hours if your order is placed before 1 PM (Monday–Friday). Orders placed after 1 PM on Friday or over the weekend will be processed the next business day.

Reviews
Price Match Guarantee

1 Year Price Lock Guarantee

Nothing is worse than watching the price drop after you make a big purchase, or wondering if you should wait until the next big sale to purchase the item you need now. With the Recon Recovery 1 year price lock guarantee you have 365 days from your purchase date to come back to us if you see the item cheaper elsewhere. Check out our Terms and Conditions for more information.