TeraFlex HD Front Axle Housings are perfect for replacing bent, broken, or damaged axles JL and JK Wrangler/Unlimited and JT Gladiator vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. Our Bare HD Front Axle Housings feature a heavy-duty housing with axle tubes, front inner axle shafts (JL and JT), bracketry, and forged inner knuckles as well as pre-installed inner axle seals and upper control arm bushings. Transfer your existing internal components (differential, ring & pinion) and outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing! Compatible with Dana 30 AdvanTEK (M186) internal components.
Features
JL Wrangler/Unlimited:
- Lift Height: 0-5"
- WMS-WMS: 66.5"
- Axle Tube: 3.25" x 0.5"
- Locker: NA
- Axle Shafts: 27-Spline
- Wheel Bolt Pattern: 5x5"
- Gear Ratio: NA
- Eliminates center axle disconnect
- Compatible with Dana 30 AdvanTEK (M186) internal components
CALL CUSTOMER SERVICE FOR OPTIONS Tera30 HD Front Axle:
- 3.25" O.D. x 0.5" wall extreme duty axle tube increases torsional strength to resist bending (JL)
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles w/ greater upper and lower section strength
- Ductile cast iron housing w/ increased rib gussets
- HD ductile iron differential cover w/ increased cover mounting area
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle and raised track bar bracket for lifted applications
- Pre-drilled holes on spring perches for bump stop extension bolts
- Retains all factory ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA w/ new components
- 1-Year/Unlimited Mileage Warranty
Fitment
- 2018 Jeep Wrangler — Does NOT fit: Sahara, Unlimited X, X
- 2019-2026 Jeep Wrangler
Additional fitment notes:
Vehicle(s):
- JL Wrangler (2-door)
JL Wrangler Unlimited (4-door) Specs:
- Lift Height: 0-5"
- WMS-WMS: 66.5"
- Axle Tube: 3.25" x 0.5"
- Locker: NA
- Axle Shafts: 27-Spline
- Wheel Bolt Pattern: 5x5"
- Gear Ratio: NA
- Eliminates center axle disconnect
- Compatible with Dana 30 AdvanTEK (M186) internal components
- CALL CUSTOMER SERVICE FOR OPTIONS
Specifications
Product Notes:
- Does NOT work w/ Front Axle Disconnect.
- Factory Front Inner Right Axle Shaft
- does NOT work w/ Tera30 HD Front Axle Housing.
- Tera30 HD Front Inner Right Axle Shaft will work w/ factory Dana 30 AdvanTEK (M186) Front Axle. Requirements & Recommendations:
- CALL CUSTOMER SERVICE FOR OPTIONS
- Long Control Arm & Bracket Kit
- 8-Arm (Alpine IR: JL2: # 1310512 or JL4: # 1310510) (Alpine: JL2: # 1316012 or JL4: # 1316010)
- Short Control Arm Kit
- 8-Arm (Alpine IR: # 1416510 or Alpine: # 1416610)
- Sport Frame Bracket Kit
- Front Control Arm (# 1938125)
- Sport Control Arm Kit
- Front Lower (# 1253000)
- HD Forged Adjustable Track Bar (Front: # 1753420 and/or Rear: # 1754420)
- HD Forged Drag Link Kit & HD Chromoly Tie Rod Kit (# 1863900)
- HD Forged Drag Link Kit (# 1863920)
- HD Chromoly Tie Rod Kit (# 1863910)
- Delta Brake System
- 5x5" (Front & Rear: # 4403450 or Front: # 4403451)
- Installation Time: 8 Hours (No R&P) / 6 Hours (Geared)
- Length: 60.5
- Width: 20
- Height: 23
- Weight: 165.0 lbs
Warranty
Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
TeraFlex Full Suspension Systems
TeraFlex full suspension systems are complete, engineered lift solutions built specifically for vehicle. Rather than a simple spring-and-spacer lift, each system is designed as a matched package: progressive-rate coil springs, tuned shocks, control arms, track bars, sway bar links, and the brackets and hardware needed to keep geometry correct at the new ride height. The result is added ground clearance and room for larger tires without sacrificing on-road manners.
Falcon Shocks by TeraFlex
Falcon Shocks are TeraFlex’s performance shock line, engineered from the ground up for specifically for your application. Each shock is a high pressure monotube design with a large diameter body, hard-chrome piston rod, and application-specific valving tuned to the weight, geometry, and suspension travel of the vehicle it’s built for—so the damping is right out of the box, whether your ride is stock height or lifted.
The lineup scales with how you drive. Entry-level monotubes sharpen control and comfort for daily driving and light trails, mid-tier models add larger bodies and more oil capacity for sustained off-road use, and top-of-the-range piggyback-reservoir shocks offer tool-free adjustable damping—plush for the highway, firm for towing, and full performance for desert and rock terrain.
TeraFlex Brake Kits
Bigger tires and added weight overwhelm factory brakes, so TeraFlex brake kits are engineered to restore and improve stopping power on lifted Jeep Wrangler and Gladiator models. The lineup ranges from bolt-on performance rotor and pad upgrades to complete big brake kits with oversized rotors, high-capacity calipers, and platform-specific brackets for greater clamping force and heat dissipation—plus extended braided stainless brake lines for lifted, long-travel suspensions. Every kit installs without cutting or fabrication and is built to handle off-road abuse, giving you stopping performance that matches your build, whether you’re on 35s or 40s.
SHOP ALL TeraFlex PRODUCTS
From complete suspension systems and Falcon shocks to brake kits, control arms, and trail-ready accessories, TeraFlex builds everything your Jeep Wrangler or Gladiator needs to go further off-road. Browse the full lineup and find the right upgrade for your build.