Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ-s stock steering to a cross steering or a flipped steering setup. Flipping" the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy bump steer and other alignment issues. Requires the TeraFlex TJ: Dana 30/44 High Steer Knuckle (# 4828490) and TJ: High Steer HD Aluminum Tie Rod Kit (Offset Stock Taper Ends: # 4920251 or Stock Taper Ends: # 4920255).
Features
- Bolts directly to new High Steer Knuckle
- Can be used to convert to cross steering or over the knuckle for flipped steering
- Helps eliminate front end shimmy and other alignment issues
- Extruded drag link eliminates excess flex during binding and high load steering maneuvers
- Constructed from 1.5" hexagonal 6061-T6 aluminum - higher specific strength than 1018 steel
- Yield strength of 45,000 lbs., yet 1/3 the weight of steel
- Aluminum construction deflects 3x further than steel allowing for return to its original shape
- Hexagon shape allows tightening of jam nuts w/ 1.5" wrench
- Tie rod end features 4140 chromoly ball/stud and 1045 carbon steel housing
Fitment
- 1997-2006 Jeep Wrangler
Additional fitment notes:
- TJ Wrangler (short wheelbase)
- LJ Wrangler Unlimited (long wheelbase)
- ZJ Grand Cherokee
- XJ Cherokee
- MJ Comanche
- Dana 30 front axle
- Rubicon Dana 44 front axle
- 4-6" Lift
Specifications
- Installation Time: 4-5 hours
- Color: 12mm X 100
- Size: 2XL
- Length: 37
- Width: 4
- Height: 4
- Weight: 8.25 lbs
Warranty
Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
TeraFlex Full Suspension Systems
TeraFlex full suspension systems are complete, engineered lift solutions built specifically for vehicle. Rather than a simple spring-and-spacer lift, each system is designed as a matched package: progressive-rate coil springs, tuned shocks, control arms, track bars, sway bar links, and the brackets and hardware needed to keep geometry correct at the new ride height. The result is added ground clearance and room for larger tires without sacrificing on-road manners.
Falcon Shocks by TeraFlex
Falcon Shocks are TeraFlex’s performance shock line, engineered from the ground up for specifically for your application. Each shock is a high pressure monotube design with a large diameter body, hard-chrome piston rod, and application-specific valving tuned to the weight, geometry, and suspension travel of the vehicle it’s built for—so the damping is right out of the box, whether your ride is stock height or lifted.
The lineup scales with how you drive. Entry-level monotubes sharpen control and comfort for daily driving and light trails, mid-tier models add larger bodies and more oil capacity for sustained off-road use, and top-of-the-range piggyback-reservoir shocks offer tool-free adjustable damping—plush for the highway, firm for towing, and full performance for desert and rock terrain.
TeraFlex Brake Kits
Bigger tires and added weight overwhelm factory brakes, so TeraFlex brake kits are engineered to restore and improve stopping power on lifted Jeep Wrangler and Gladiator models. The lineup ranges from bolt-on performance rotor and pad upgrades to complete big brake kits with oversized rotors, high-capacity calipers, and platform-specific brackets for greater clamping force and heat dissipation—plus extended braided stainless brake lines for lifted, long-travel suspensions. Every kit installs without cutting or fabrication and is built to handle off-road abuse, giving you stopping performance that matches your build, whether you’re on 35s or 40s.
SHOP ALL TeraFlex PRODUCTS
From complete suspension systems and Falcon shocks to brake kits, control arms, and trail-ready accessories, TeraFlex builds everything your Jeep Wrangler or Gladiator needs to go further off-road. Browse the full lineup and find the right upgrade for your build.