Skip to content

TeraFlex Dana 30/44 High Steer System W/ HD Tie Rod Kit & HD Drag Link Flip Kit for 2007-2018 Jeep Wrangler

SKU 4391000
Availability:
In stock
Original price $1,938.97 - Original price $1,938.97
Original price
$1,938.97
$1,938.97 - $1,938.97
Current price $1,938.97

Does this part fit my vehicle?

Verify

The complete TeraFlex JK: Dana 30/44 High Steer System w/ HD Chromoly Tie Rod Kit & HD Forged Drag Link Flip Kit addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models. This system beefs up the steering components of the Dana 30 or Dana 44 front axle, helps maximize steering component ground clearance, and restores correct steering geometry for superior highway drivability. Highly recommended for JK models with 4" or more lift. These High Steer Knuckles maintain correct steering geometry angles for superior highway drivability. Tie Rod ground clearance is increased by more than 1-1/8" to prevent tie rod damage and bending. Cast from heavy-duty ductile iron and reinforced in areas prone to stress and deflection. "Flipping" the HD Forged Drag Link (50% stiffer than factory) over the Knuckle helps eliminate front-end shimmy and other alignment issues. The axle end joint is flipped 180 degrees so it can be pressed down into the top of the knuckle. The Front Upper Track Bar Drop Bracket lowers the Front Track Bar mounting point to correct steering geometry for superior highway drivability. Multiple track bar mounting holes allow you to fine tune the track bar angle to reduce bump steer and other front-end issues. The Front Right Frame Brace and Front Frame Brace Bar reinforce the frame further reducing front end shimmy and excess frame movement. Our complete High Steer System (# 4391000) combines our High Steer Knuckle Pair (# 4390870) with our HD Chromoly Tie Rod Kit (# 1853910), HD Forged Drag Link Flip Kit (# 1853930), Front Upper Track Bar Drop Bracket & Frame Brace Kit (# 1600444), and Steering Stabilizer Relocation Kit (# 1123160). Most replacement components available separately. Compatible with all factory and aftermarket axle shafts, ball joints, wheel hubs, and tie rods. Does not affect operation of factory stability and traction control systems including ESP and ABS.

Features
  • Addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models
  • Installation does not require any cutting or removal of factory bracketry
  • Check the individual part numbers below for more detailed Features & Benefits:
  • High Steer Knuckle Pair (4-6" Lift) (# 4390870)
  • Track Bar Drop Bracket & Frame Brace Kit - Front Upper (4-6" Lift) (# 1600444)
  • HD Chromoly Tie Rod Kit (0-6" Lift) 1853910)
  • HD Forged Drag Link Flip Kit (4-6" Lift) (# 1853930)
  • Steering Stabilizer Relocation Kit (1-5/8" HD Tie Rod) (# 1123160)
Fitment
  • 2007-2009 Jeep Wrangler — Does NOT fit: Sport, Unlimited Sport
  • 2010 Jeep Wrangler
  • 2011-2017 Jeep Wrangler — Does NOT fit: Unlimited X, X
  • 2018 Jeep Wrangler — Does NOT fit: Sport S, Unlimited Sport S, Unlimited X, X

Additional fitment notes:

  • Vehicle(s):
  • JK Wrangler (2-door)
  • JK Wrangler Unlimited (4-door)
  • Axle(s):
  • Dana 30 front axle
  • Dana 44 front axle
  • Lift Height:
  • 4-6" Lift
Specifications

Product Notes:

  • REQUIRES aftermarket wheels w/ 4.75" backspacing or less
  • or 1.25" Wheel Offset Adapter Pair (# 1055000 x 2) for stock wheels "" NOT INCLUDED.
  • NOT compatible w/ Falcon Nexus EF Steering Stabilizers when used w/ factory-style track bar bracket and/or factory-style axle housing. Incompatible Nexus EF Steering Stabilizers: 2.2 Fast Adjust (1-3/8" OEM Tie Rod: # 01-02-22-110-138) (1-1/2" HD Tie Rod: # 01-02-22-110-112) (1-5/8" HD Tie Rod: # 01-02-22-110-158) or 2.1 (1-3/8" OEM Tie Rod: # 01-02-21-110-138) (1-1/2" HD Tie Rod: # 01-02-21-110-112) (1-5/8" HD Tie Rod: # 01-02-21-110-158).
  • REQUIRES welding.
  • Installation Time: 7 Hours
  • Length: 45.5
  • Width: 16
  • Height: 10.75
  • Weight: 105.0 lbs

Warranty

Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

TeraFlex Full Suspension Systems

TeraFlex Full Suspension Systems

TeraFlex full suspension systems are complete, engineered lift solutions built specifically for vehicle. Rather than a simple spring-and-spacer lift, each system is designed as a matched package: progressive-rate coil springs, tuned shocks, control arms, track bars, sway bar links, and the brackets and hardware needed to keep geometry correct at the new ride height. The result is added ground clearance and room for larger tires without sacrificing on-road manners.

Falcon Shocks by TeraFlex

Falcon Shocks by TeraFlex

Falcon Shocks are TeraFlex’s performance shock line, engineered from the ground up for specifically for your application. Each shock is a high pressure monotube design with a large diameter body, hard-chrome piston rod, and application-specific valving tuned to the weight, geometry, and suspension travel of the vehicle it’s built for—so the damping is right out of the box, whether your ride is stock height or lifted.

The lineup scales with how you drive. Entry-level monotubes sharpen control and comfort for daily driving and light trails, mid-tier models add larger bodies and more oil capacity for sustained off-road use, and top-of-the-range piggyback-reservoir shocks offer tool-free adjustable damping—plush for the highway, firm for towing, and full performance for desert and rock terrain.

TeraFlex Brake Kits

TeraFlex Brake Kits

Bigger tires and added weight overwhelm factory brakes, so TeraFlex brake kits are engineered to restore and improve stopping power on lifted Jeep Wrangler and Gladiator models. The lineup ranges from bolt-on performance rotor and pad upgrades to complete big brake kits with oversized rotors, high-capacity calipers, and platform-specific brackets for greater clamping force and heat dissipation—plus extended braided stainless brake lines for lifted, long-travel suspensions. Every kit installs without cutting or fabrication and is built to handle off-road abuse, giving you stopping performance that matches your build, whether you’re on 35s or 40s.

SHOP ALL TeraFlex PRODUCTS

SHOP ALL TeraFlex PRODUCTS

From complete suspension systems and Falcon shocks to brake kits, control arms, and trail-ready accessories, TeraFlex builds everything your Jeep Wrangler or Gladiator needs to go further off-road. Browse the full lineup and find the right upgrade for your build.

SHOP Teraflex NOW
Description

The complete TeraFlex JK: Dana 30/44 High Steer System w/ HD Chromoly Tie Rod Kit & HD Forged Drag Link Flip Kit addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models. This system beefs up the steering components of the Dana 30 or Dana 44 front axle, helps maximize steering component ground clearance, and restores correct steering geometry for superior highway drivability. Highly recommended for JK models with 4" or more lift. These High Steer Knuckles maintain correct steering geometry angles for superior highway drivability. Tie Rod ground clearance is increased by more than 1-1/8" to prevent tie rod damage and bending. Cast from heavy-duty ductile iron and reinforced in areas prone to stress and deflection. "Flipping" the HD Forged Drag Link (50% stiffer than factory) over the Knuckle helps eliminate front-end shimmy and other alignment issues. The axle end joint is flipped 180 degrees so it can be pressed down into the top of the knuckle. The Front Upper Track Bar Drop Bracket lowers the Front Track Bar mounting point to correct steering geometry for superior highway drivability. Multiple track bar mounting holes allow you to fine tune the track bar angle to reduce bump steer and other front-end issues. The Front Right Frame Brace and Front Frame Brace Bar reinforce the frame further reducing front end shimmy and excess frame movement. Our complete High Steer System (# 4391000) combines our High Steer Knuckle Pair (# 4390870) with our HD Chromoly Tie Rod Kit (# 1853910), HD Forged Drag Link Flip Kit (# 1853930), Front Upper Track Bar Drop Bracket & Frame Brace Kit (# 1600444), and Steering Stabilizer Relocation Kit (# 1123160). Most replacement components available separately. Compatible with all factory and aftermarket axle shafts, ball joints, wheel hubs, and tie rods. Does not affect operation of factory stability and traction control systems including ESP and ABS.

Features
  • Addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models
  • Installation does not require any cutting or removal of factory bracketry
  • Check the individual part numbers below for more detailed Features & Benefits:
  • High Steer Knuckle Pair (4-6" Lift) (# 4390870)
  • Track Bar Drop Bracket & Frame Brace Kit - Front Upper (4-6" Lift) (# 1600444)
  • HD Chromoly Tie Rod Kit (0-6" Lift) 1853910)
  • HD Forged Drag Link Flip Kit (4-6" Lift) (# 1853930)
  • Steering Stabilizer Relocation Kit (1-5/8" HD Tie Rod) (# 1123160)
Fitment
  • 2007-2009 Jeep Wrangler — Does NOT fit: Sport, Unlimited Sport
  • 2010 Jeep Wrangler
  • 2011-2017 Jeep Wrangler — Does NOT fit: Unlimited X, X
  • 2018 Jeep Wrangler — Does NOT fit: Sport S, Unlimited Sport S, Unlimited X, X

Additional fitment notes:

  • Vehicle(s):
  • JK Wrangler (2-door)
  • JK Wrangler Unlimited (4-door)
  • Axle(s):
  • Dana 30 front axle
  • Dana 44 front axle
  • Lift Height:
  • 4-6" Lift
Specifications

Product Notes:

  • REQUIRES aftermarket wheels w/ 4.75" backspacing or less
  • or 1.25" Wheel Offset Adapter Pair (# 1055000 x 2) for stock wheels "" NOT INCLUDED.
  • NOT compatible w/ Falcon Nexus EF Steering Stabilizers when used w/ factory-style track bar bracket and/or factory-style axle housing. Incompatible Nexus EF Steering Stabilizers: 2.2 Fast Adjust (1-3/8" OEM Tie Rod: # 01-02-22-110-138) (1-1/2" HD Tie Rod: # 01-02-22-110-112) (1-5/8" HD Tie Rod: # 01-02-22-110-158) or 2.1 (1-3/8" OEM Tie Rod: # 01-02-21-110-138) (1-1/2" HD Tie Rod: # 01-02-21-110-112) (1-5/8" HD Tie Rod: # 01-02-21-110-158).
  • REQUIRES welding.
  • Installation Time: 7 Hours
  • Length: 45.5
  • Width: 16
  • Height: 10.75
  • Weight: 105.0 lbs

 

 

Warranty

Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

Delivery & Shipping Time

Need Your Order Fast?

If you have an urgent order, please don’t hesitate to call, message, or email us during our business hours to check current inventory and lead times. We’re happy to help make sure your order stays on schedule! (1-800-359-9397)

We strive to ship all in-stock items within 24 hours of purchase, and in many cases, within a few hours if your order is placed before 1 PM (Monday–Friday). Orders placed after 1 PM on Friday or over the weekend will be processed the next business day.

Reviews
Price Match Guarantee

1 Year Price Lock Guarantee

Nothing is worse than watching the price drop after you make a big purchase, or wondering if you should wait until the next big sale to purchase the item you need now. With the Recon Recovery 1 year price lock guarantee you have 365 days from your purchase date to come back to us if you see the item cheaper elsewhere. Check out our Terms and Conditions for more information.