Skip to content
Garage Sale: Up to 70% Off Select Parts
Garage Sale: Up to 70% Off Select Parts
TeraFlex 70'' Tera60 HD Front Axle W/ Locking Hub for 2018-2026 Jeep Gladiator & Wrangler - Recon Recovery

TeraFlex 70'' Tera60 HD Front Axle W/ Locking Hub for 2018-2026 Jeep Gladiator & Wrangler

by TeraFlex
SKU 3150000
Availability:
In stock
Availability:
In stock
Availability:
In stock
Availability:
In stock
$9,197.99 - $11,544.99
$9,197.99
$9,197.99 - $11,544.99
$9,197.99

Does this part fit my vehicle?

Verify

The Tera60 HD Front Axle Assembly w/ Locking Hub includes SlimLock Hub Kit, Super 60 bearings, inner and outer axle shafts, knuckle assembly, ball joints, brakes, and sensors. Add your choice of ring & pinion gear ratio, and carrier. TeraFlex HD Front Axle Housings are perfect for replacing bent, broken, or damaged axles in JL Wrangler/Unlimited and JT Gladiator vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles weak areas. Tera60 HD Front Axle Housings are the ultimate upgrade for JL and JT models requiring maximum suspension up travel and compression. Compatible with all Super 60 gear ratios for extreme duty applications requiring additional ring and pinion strength. Our heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, forged inner knuckles, and more! * DESIGNED FOR USE WITH COILOVER SUSPENSION *

Features
  • Sealed SlimLock Locking Hub Assembly for long-term maintenance-free dependability
  • Coilover Brackets
  • 3.25" O.D. x 0.375" wall DOM axle tube for superior strength vs. weight
  • 70" WMS-WMS and 8x6.5" wheel bolt pattern
  • Fixed spindle mount hub assembly
  • Tera60 specific high-pinion front axle housing design
  • Includes 1350 series pinion yoke
  • 35-spline inner axle shafts and outer stub shafts
  • Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
  • Oversized outer pinion bearing handles increased torque and high-load conditions
  • High-capacity housing holds maximum amount of oil
  • Asymmetric housing design for extra-long tube side strength
  • Pre-installed inner axle seals
  • HD forged inner knuckles w/ greater upper and lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Smooth radius bottom design to glide over rocks and obstacles
  • Integrated lower control arm skid plates
  • High-flow oil passages
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • UV protected triple-stage powder coat for corrosion resistance
  • 1/4"-thick CNC laser cut axle brackets for extreme strength
  • Integrating the front upper control arm mounts into the housing increases up travel an additional 2" compared to other aftermarket Dana 60 axles
  • Pre-installed upper control arm bushings
  • Proper pinion angle and raised track bar bracket for lifted JL/JT applications
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Retains all JL/JT ESP, ABS, and speedometer sensor capability
  • 100% engineered, designed, and built in the USA w/ new components
  • 1-Year/Unlimited Mileage Warranty
Fitment
  • 2020-2026 Jeep Gladiator
  • 2018 Jeep Wrangler — Does NOT fit: Sahara, Unlimited X, X
  • 2019-2026 Jeep Wrangler

Additional fitment notes:

  • JL Wrangler (2-door) - JL Wrangler Unlimited (4-door) - JT Gladiator (pickup) - 0-6" Lift Specs: - WMS-WMS: 70" - Axle Tube: 3.25" x 0.375" - Wheel Bolt Pattern: 8x6.5" - Gear Ratio: No R&P
  • * DESIGNED FOR USE WITH COILOVER SUSPENSION *
Specifications
  • Installation Time: 8 Hours (No R&P) / 6 Hours (Geared) install time
  • Color: 12mm X 100
  • Size: 2XL
  • Length: 70
  • Width: 30
  • Height: 24
  • Weight: 450.0 lbs
Warranty

Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

TeraFlex Full Suspension Systems

TeraFlex Full Suspension Systems

TeraFlex full suspension systems are complete, engineered lift solutions built specifically for vehicle. Rather than a simple spring-and-spacer lift, each system is designed as a matched package: progressive-rate coil springs, tuned shocks, control arms, track bars, sway bar links, and the brackets and hardware needed to keep geometry correct at the new ride height. The result is added ground clearance and room for larger tires without sacrificing on-road manners.

Falcon Shocks by TeraFlex

Falcon Shocks by TeraFlex

Falcon Shocks are TeraFlex’s performance shock line, engineered from the ground up for specifically for your application. Each shock is a high pressure monotube design with a large diameter body, hard-chrome piston rod, and application-specific valving tuned to the weight, geometry, and suspension travel of the vehicle it’s built for—so the damping is right out of the box, whether your ride is stock height or lifted.

The lineup scales with how you drive. Entry-level monotubes sharpen control and comfort for daily driving and light trails, mid-tier models add larger bodies and more oil capacity for sustained off-road use, and top-of-the-range piggyback-reservoir shocks offer tool-free adjustable damping—plush for the highway, firm for towing, and full performance for desert and rock terrain.

TeraFlex Brake Kits

TeraFlex Brake Kits

Bigger tires and added weight overwhelm factory brakes, so TeraFlex brake kits are engineered to restore and improve stopping power on lifted Jeep Wrangler and Gladiator models. The lineup ranges from bolt-on performance rotor and pad upgrades to complete big brake kits with oversized rotors, high-capacity calipers, and platform-specific brackets for greater clamping force and heat dissipation—plus extended braided stainless brake lines for lifted, long-travel suspensions. Every kit installs without cutting or fabrication and is built to handle off-road abuse, giving you stopping performance that matches your build, whether you’re on 35s or 40s.

SHOP ALL TeraFlex PRODUCTS

SHOP ALL TeraFlex PRODUCTS

From complete suspension systems and Falcon shocks to brake kits, control arms, and trail-ready accessories, TeraFlex builds everything your Jeep Wrangler or Gladiator needs to go further off-road. Browse the full lineup and find the right upgrade for your build.

SHOP Teraflex NOW
Description

The Tera60 HD Front Axle Assembly w/ Locking Hub includes SlimLock Hub Kit, Super 60 bearings, inner and outer axle shafts, knuckle assembly, ball joints, brakes, and sensors. Add your choice of ring & pinion gear ratio, and carrier. TeraFlex HD Front Axle Housings are perfect for replacing bent, broken, or damaged axles in JL Wrangler/Unlimited and JT Gladiator vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles weak areas. Tera60 HD Front Axle Housings are the ultimate upgrade for JL and JT models requiring maximum suspension up travel and compression. Compatible with all Super 60 gear ratios for extreme duty applications requiring additional ring and pinion strength. Our heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, forged inner knuckles, and more! * DESIGNED FOR USE WITH COILOVER SUSPENSION *

Features
  • Sealed SlimLock Locking Hub Assembly for long-term maintenance-free dependability
  • Coilover Brackets
  • 3.25" O.D. x 0.375" wall DOM axle tube for superior strength vs. weight
  • 70" WMS-WMS and 8x6.5" wheel bolt pattern
  • Fixed spindle mount hub assembly
  • Tera60 specific high-pinion front axle housing design
  • Includes 1350 series pinion yoke
  • 35-spline inner axle shafts and outer stub shafts
  • Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
  • Oversized outer pinion bearing handles increased torque and high-load conditions
  • High-capacity housing holds maximum amount of oil
  • Asymmetric housing design for extra-long tube side strength
  • Pre-installed inner axle seals
  • HD forged inner knuckles w/ greater upper and lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Smooth radius bottom design to glide over rocks and obstacles
  • Integrated lower control arm skid plates
  • High-flow oil passages
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • UV protected triple-stage powder coat for corrosion resistance
  • 1/4"-thick CNC laser cut axle brackets for extreme strength
  • Integrating the front upper control arm mounts into the housing increases up travel an additional 2" compared to other aftermarket Dana 60 axles
  • Pre-installed upper control arm bushings
  • Proper pinion angle and raised track bar bracket for lifted JL/JT applications
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Retains all JL/JT ESP, ABS, and speedometer sensor capability
  • 100% engineered, designed, and built in the USA w/ new components
  • 1-Year/Unlimited Mileage Warranty
Fitment
  • 2020-2026 Jeep Gladiator
  • 2018 Jeep Wrangler — Does NOT fit: Sahara, Unlimited X, X
  • 2019-2026 Jeep Wrangler

Additional fitment notes:

  • JL Wrangler (2-door) - JL Wrangler Unlimited (4-door) - JT Gladiator (pickup) - 0-6" Lift Specs: - WMS-WMS: 70" - Axle Tube: 3.25" x 0.375" - Wheel Bolt Pattern: 8x6.5" - Gear Ratio: No R&P
  • * DESIGNED FOR USE WITH COILOVER SUSPENSION *
Specifications
  • Installation Time: 8 Hours (No R&P) / 6 Hours (Geared) install time
  • Color: 12mm X 100
  • Size: 2XL
  • Length: 70
  • Width: 30
  • Height: 24
  • Weight: 450.0 lbs
Warranty

Backed by TeraFlex limited warranty — Contact Recon Recovery for any warranty claims.

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

Delivery & Shipping Time

Need Your Order Fast?

If you have an urgent order, please don’t hesitate to call, message, or email us during our business hours to check current inventory and lead times. We’re happy to help make sure your order stays on schedule! (1-800-359-9397)

We strive to ship all in-stock items within 24 hours of purchase, and in many cases, within a few hours if your order is placed before 1 PM (Monday–Friday). Orders placed after 1 PM on Friday or over the weekend will be processed the next business day.

Reviews
Price Match Guarantee

1 Year Price Lock Guarantee

Nothing is worse than watching the price drop after you make a big purchase, or wondering if you should wait until the next big sale to purchase the item you need now. With the Recon Recovery 1 year price lock guarantee you have 365 days from your purchase date to come back to us if you see the item cheaper elsewhere. Check out our Terms and Conditions for more information.