ReadyLIFT proudly introduces the 3" SST3.3 Suspension System with Falcon 3.3 Struts and Shocks (PN 62-54360), engineered specifically for 2024–2026 Toyota Tacoma models equipped with factory rear coil springs.
This complete suspension system provides 3 inches of front lift and 2 inches of rear lift while improving ground clearance, suspension performance, and tire clearance. Falcon 3.3 Fast Adjust Dampers provide independent compression adjustment, while ReadyLIFT tubular steel upper control arms with high-angle ball joints help maintain proper suspension geometry.
The system also includes a full-use skid plate and installs without cutting or permanent vehicle modifications. It accommodates up to 285/75R17 tires on 17x8 wheels with a +35 offset or 295/55R20 tires on 20x8.5 wheels with a +35 offset without trimming. Up to 35-inch tires may be installed with minor trimming.
Features
- Provides 3 inches of front lift and 2 inches of rear lift
- Designed for 2024–2026 Toyota Tacoma models equipped with factory rear coil springs
- Falcon 3.3 Fast Adjust front coilovers and rear reservoir dampers
- Three-position main compression adjustment: Soft, Custom, and Firm
- Eight-position Micro Adjust compression control
- Monotube reservoir design with Red Line oil and Volume Optimized Damping
- Hard-anodized 6061-T6 aluminum damper bodies
- Tubular steel upper control arms with proprietary high-angle ball joints
- Accommodates up to 285/75R17 tires on 17x8 wheels with a +35 offset without trimming
- Accommodates up to 295/55R20 tires on 20x8.5 wheels with a +35 offset without trimming
- Accommodates 315/70R17 or 35x12.50R17 tires with minor trimming
- Includes a full-use skid plate
- Bolt-on installation with no cutting or permanent vehicle modifications required
- Fitment has not been confirmed on vehicles equipped with the optional sway bar disconnect
Refer to the tire fitment guide along with the year make model data. Tire fitments shown are for Maximum size and based on a no rub or no modifications required fitment. ReadyLIFT & Recon Recovery is not responsible if the listed max sizes are exceeded. Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.
Fitment
- 2024–2026 Toyota Tacoma — Factory Rear Coil Spring Equipped
- Lift: 3.0" F–2.0" R | Max Tire: 285/75R17 | Wheel Width: 8" | Offset: +35 | Trimming: None
- Lift: 3.0" F–2.0" R | Max Tire: 295/55R20 | Wheel Width: 8.5" | Offset: +35 | Trimming: None
Note: Not compatible with 2026 Tacoma models equipped with rear leaf springs.
Note: Not compatible with Adaptive Variable Suspension (AVS) vehicles. If installed on an AVS vehicle, a dash light will illuminate.
Specifications
- Fitment: Direct Fitment
- Front or Rear: Front and Rear
- Front Lift Height: 3 Inches
- Front Lift Component: Coilover
- Rear Lift Height: 2 Inches
- Rear Lift Component: Coil Spring
- Max Tire Size: 35 Inch
- Installation Time: 5+ Hours
- Install Difficulty: Difficult Requires Professional Installation
- Color: Black
- Country of Origin: US
Warranty
READYLIFT® “NO HASSLE” PRODUCT WARRANTY
This unique “no hassle” product warranty proves their commitment to the quality of every product that ReadyLIFT produces. ReadyLIFT product warranty only extends to the Original Purchaser of any ReadyLIFT product. If it breaks, they'll give you a new part.
Any ReadyLIFT products containing missing or defective components will be covered under warranty by ReadyLIFT. Please contact Recon Recovery to initiate a warranty claim. In the event of a defective product, ReadyLIFT may request a return of the defective product (at ReadyLIFT expense) so the quality team can analyze the nature of the defect. Returning defective product will not delay the replacement part delivery.
ReadyLIFT leveling kit, block kits and lift kit products are NOT intended for off-road abuse. Any abuse or damage as a result of off-road use voids the warranty of the ReadyLIFT product. Exception: ReadyLIFT Jeep SST and Terrain Flex Lift Kits are designed for normal off-road use to complement the Jeep vehicle's off-road capability. All Jeep Lift Kit products are covered under warranty when used in recreational off-road environments.
Wearable components including, but not limited to, shocks, ball joints, heim joints, bushings, and steering extensions, are covered for up to 1-year. Labor, installation, surcharges or any other applicable fees from the original purchase are non-refundable. ReadyLIFT is not responsible for any consequential damage to vehicles.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
Leveling Kits
Level out your truck or SUV with ReadyLift leveling kits. Engineered to eliminate factory rake, these premium-grade kits raise the front end to match the rear — giving you a balanced stance and room for larger tires. Available for most years, makes, and models.
SST Lift Kits
The original mid-lift solution for trucks, Jeeps, and SUVs. ReadyLift SST Lift Kits are built for drivers who want more than a leveling kit but aren't ready for a full big lift — delivering added height and tire clearance with factory-quality ride and handling.
Big Lift Kits
Run larger tires and give your vehicle an aggressive look with ReadyLift Big Lift Kits. Engineered for maximum height without sacrificing factory ride quality, these complete systems deliver serious clearance while keeping handling and steering geometry in check.
SHOP ALL Readylift Products
ReadyLift builds premium leveling, mid-lift, and big lift kits for trucks, Jeeps, and SUVs — engineered to add height and tire clearance without giving up factory ride quality.