The new Ram HD 3" Coil Spring Lift Kit is specifically designed for Heavy-Duty applications utilizing ReadyLIFT-engineered new front coil springs and Falcon 1.1 Monotube front & rear shocks. The 3" kits are equipped with front and rear Falcon shocks, Heavy-Duty front coil springs, and bump stop spacers. The 2500 kit includes rear spacers to achieve a neutral, lifted stance. The 3" kits allow up to a 35x12.50 tire and 20x9 wheel with a 0 offset.

ReadyLIFT's kit provides plenty of clearance for larger aggressive tires and wheels delivering a muscular, tough look, all while improving the factory ride quality.

Features

• Front coil spring with 3" lift/leveling capability
• Maximum lift of 3 inches
• Compatible with 2019-2024 Ram 2500 models
• Designed for 4-corner Falcon 1.1 monotube shocks
• Includes rear spacers for added support
• Specifically designed for diesel motors in Ram HD models
• Not compatible with Power Wagon or Snow Prep/Ambulance Package
• Single Cab configuration has not been validated for fitment and drivability by ReadyLIFT

Refer to the tire fitment guide along with the year make model data. Tire fitments shown are for Maximum size and based on a no rub or no modifications required fitment. ReadyLIFT & Recon Recovery is not responsible if the listed max sizes are exceeded. Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.

Fitment

• 2019-2024 Ram 2500 — 4WD
  • 2019-2024 DODGE RAM 2500: Lift: 3.0" F | Max Tire: 35" x 12.5" (325/60R20) | Wheel Width: 9" | Backspacing: 5" | Offset: 0

Specifications

• Fitment: Direct Fitment
• Front or Rear: Front and Rear
• Front Lift Height: 3 Inches
• Front Lift Component: Coil Spring
• Front Shocks: Falcon 1.1 Monotube
• Rear Lift Height: 3 Inches
• Rear Lift Component: Coil Spring Spacer
• Rear Shocks: Falcon 1.1 Monotube
• Max Tire Size: 35 Inch
• Installation Time: 4 Hours
• Install Difficulty: Difficult Requires Professional Installation
• Country of Origin: US

Warranty

READYLIFT® “NO HASSLE” PRODUCT WARRANTY

This unique “no hassle” product warranty proves their commitment to the quality of every product that ReadyLIFT produces. ReadyLIFT product warranty only extends to the Original Purchaser of any ReadyLIFT product. If it breaks, they'll give you a new part.

Any ReadyLIFT products containing missing or defective components will be covered under warranty by ReadyLIFT. Please contact Recon Recovery to initiate a warranty claim. In the event of a defective product, ReadyLIFT may request a return of the defective product (at ReadyLIFT expense) so the quality team can analyze the nature of the defect. Returning defective product will not delay the replacement part delivery.

ReadyLIFT leveling kit, block kits and lift kit products are NOT intended for off-road abuse. Any abuse or damage as a result of off-road use voids the warranty of the ReadyLIFT product. Exception: ReadyLIFT Jeep SST and Terrain Flex Lift Kits are designed for normal off-road use to complement the Jeep vehicle's off-road capability. All Jeep Lift Kit products are covered under warranty when used in recreational off-road environments.

Wearable components including, but not limited to, shocks, ball joints, heim joints, bushings, and steering extensions, are covered for up to 1-year. Labor, installation, surcharges or any other applicable fees from the original purchase are non-refundable. ReadyLIFT is not responsible for any consequential damage to vehicles.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.