2016–2023 TOYOTA TACOMA 5FT SHORT BED – OPENROAD INTEGRATED ALUMINUM CAMPER SYSTEM

Sleep above, store below, go farther. The OPENROAD Aluminum Truck Topper with Integrated Rooftop Tent is a complete truck-camping platform for the 3rd-gen Toyota Tacoma 5ft short bed — combining a covered aluminum camper shell, a fast-opening rooftop tent, and accessory-ready construction into one connected system. This isn't a truck cap with a rooftop tent bolted on top; it's an integrated overland camper designed from the ground up to work as one clean platform for daily use and weekend adventures alike.

Setup takes just 60 seconds. Arrive at camp, release the latches, raise the tent, and you're ready to sleep — no ground tent to pitch, no gear to unload, no camp to rebuild. Inside, a 78" x 49" sleeping area with a 2" dual-layer memory foam mattress and 56" of open interior headroom gives 2-3 people real room to stretch out, sit up, and settle in. Below the tent, the aluminum camper shell keeps coolers, tools, recovery gear, and luggage secured and protected from the elements — turning your Tacoma bed into a lockable cargo vault that doubles as a mobile basecamp.

Every material choice is engineered for the way Tacoma owners actually use their trucks. Aluminum alloy shell construction keeps weight down without sacrificing strength — critical for a mid-size truck where payload capacity matters. Honeycomb aluminum flooring adds support, insulation, and sound dampening. The insulated shell paired with an Oxford rainfly delivers 4-season protection against sun, wind, rain, and cold. Rated for 440 lbs dynamic and 1,100 lbs static load, the system supports your rooftop tent occupants, gear, and even lightweight accessories mounted to the crossbars. Speaking of accessories — side-mount zones on the panels are ready for recovery boards, water storage, or trail tools, and top crossbars accommodate solar panels and additional camping gear.

Key Highlights:

• Purpose-fit for 2016–2023 Toyota Tacoma 5ft short bed (3rd Gen)
• Integrated aluminum camper shell + rooftop tent (one system)
• 60-second rooftop tent setup
• Sleeps 2-3 people (78" x 49" sleeping area)
• 56" open interior height
• 2" dual-layer memory foam mattress included
• Aluminum alloy shell construction
• Honeycomb aluminum flooring for support and insulation
• 440 lb dynamic / 1,100 lb static load rating
• Insulated shell with Oxford rainfly for 4-season protection
• Side-mount accessory zones for gear
• Top crossbars for solar panels and additional gear
• Covered lockable cargo storage below tent
• 100-Day Returns
• Financing available through Affirm

Get ready to sleep above, store below, and go farther — the OPENROAD Integrated Aluminum Camper is the ultimate overland platform for your Tacoma.

Specs

Features

• One Connected Camper System: The shell, tent, and cargo space work together as one clean truck-camping platform. Sleep space above, covered cargo below — built for daily driving and weekend camping alike, not two separate accessories awkwardly stacked together.
• 60-Second Setup: Open the tent quickly and settle in without unloading a separate ground tent. Less unloading when you arrive at camp, faster stops, quicker overnight trips.
• Real Interior Comfort: A 78" x 49" raised sleeping area with a 2" dual-layer memory foam mattress and 56" of open interior height gives 2-3 people genuine room to rest, sit up, and change clothes inside the tent.
• Aluminum Alloy Construction: Aluminum shell construction delivers strength without unnecessary weight — critical for maintaining your Tacoma's payload capacity, off-road capability, and fuel economy.
• Honeycomb Aluminum Flooring: Added support and insulation from below — reduces heat transfer, sound transmission, and cold-weather chill compared to standard flooring.
• 440 lb Dynamic / 1,100 lb Static Load Rating: Supports rooftop tent occupants, gear, and lightweight accessories mounted to the crossbars — designed for real-world overland loads, not just marketing numbers.
• Insulated Shell + Oxford Rainfly: Layered weather materials deliver sun, wind, and rain protection across all four seasons.
• Covered Cargo Below: Keep coolers, tools, recovery gear, luggage, and dirty outdoor equipment protected and secured in the truck bed — a lockable cargo vault that doubles as your basecamp.
• Awning Ready: Side-mounted awning compatibility means you can build a faster daytime basecamp with shade and shelter (awning sold separately).
• Side-Mount Accessory Zones: Carry recovery boards, water storage, tools, or trail gear on the side panels — turning dead exterior space into working storage.
• Top Crossbars for Solar & Gear: Use the top crossbar area for solar panels, cargo boxes, or lightweight travel gear.
• Tacoma-Specific Fitment: Purpose-engineered for the 3rd-gen Tacoma 5ft short bed platform — not a modified full-size cap, not a universal-fit compromise.
• Six Real Use Cases: Daily driver cargo cap, secure gear storage, weekend camping, overland travel, outdoor sports basecamp, and off-grid extended stays — one integrated camper that adapts to how you actually use your Tacoma.

Fitment

Important Fitment Notes:

• This listing fits the 3rd-generation (2016–2023) Toyota Tacoma with the 5ft short bed only.
• NOT compatible with the 6ft long bed — different SKU required.
• NOT compatible with the all-new 4th-gen Tacoma (2024+) — the redesigned Tacoma has different bed rail geometry. 

FAQ

• Is this a truck topper AND a rooftop tent? Yes. The OPENROAD Integrated Aluminum Camper combines an aluminum camper shell and rooftop tent as one connected truck-camping system. You get covered cargo storage below and a fast-opening sleeping platform above — engineered to work together, not as two separate purchases bolted together.
• How do I know if I have the 5ft short bed? Measure your Tacoma's bed from the inside of the bulkhead (front wall) to the inside of the closed tailgate. A 5ft short bed measures approximately 60.5 inches. The 5ft short bed is standard on the Double Cab Tacoma configuration in the 3rd generation.
• Will this fit my 2024 or newer Tacoma? No. This listing fits the 3rd-generation (2016–2023) Tacoma only. Toyota redesigned the Tacoma for 2024 with a completely new platform and different bed rail geometry. OPENROAD may offer a 4th-gen Tacoma variant — contact us for the latest.
• How long does setup take? Setup takes approximately 60 seconds — release the latches and raise the tent. Actual setup time may vary with experience and conditions, but the design is intentionally fast so you can get to sleep or hit the road without a lengthy camp routine.
• How many people can sleep in the tent? The rooftop tent comfortably sleeps 2-3 people, with a 78" x 49" sleeping area and 56" of interior headroom. A 2" dual-layer memory foam mattress is included.
• What's the weight capacity? The system is rated for 440 lbs dynamic load (while driving) and 1,100 lbs static load (parked). This supports the tent occupants, gear inside, and lightweight accessories mounted to the crossbars.
• Will this affect my Tacoma's payload? Yes. Like any truck camper, the OPENROAD Integrated Camper adds weight to your truck. Verify that the combined weight of the camper, occupants, and gear stays within your Tacoma's payload rating. The aluminum construction was chosen specifically to minimize weight impact.
• Will this fit my TRD Pro or TRD Off-Road Tacoma? Yes. The camper fits all 3rd-gen Tacoma trims (SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro) with the 5ft short bed.
• Can I mount accessories to the camper? Yes. The side panels have accessory-ready mounting zones for recovery boards, water storage, tools, and trail gear. The top crossbars accept solar panels, cargo boxes, and lightweight camping gear. Verify attachment method, total weight, clearance, and load limits with your specific accessories before use.
• Is this compatible with a side-mount awning? Yes. The camper is awning-ready with side-mount compatibility for building a faster daytime basecamp. Awning is sold separately.
• Can I lock the cargo area? Yes. Keys and lock hardware are included with the camper to secure the cargo area beneath the tent.
• Is it truly a 4-season camper? Yes. The insulated aluminum shell, honeycomb aluminum flooring, and Oxford rainfly work together to provide protection from sun, wind, rain, and cold across all four seasons.
• Can I use my truck bed for cargo while the camper is installed? Yes. That's a key advantage of the integrated design — the aluminum shell provides covered, lockable cargo storage in the truck bed even when the tent is closed and stowed for travel.
• What's included in the package? Package includes: aluminum camper shell (×1), integrated rooftop tent (×1), crossbars (×2), mounting hardware set (×1), keys/lock hardware set, and installation reference (×1). Verify final package contents with OPENROAD before ordering.
• How is the camper mounted? The camper installs using a mounting hardware set and secures to the truck bed via clamping-style attachment. Full installation reference is included. Professional installation is strongly recommended due to the size and weight of the system.
• What's the return policy? OPENROAD offers 100-day returns built around confident product fitment. If the product doesn't work for your setup, contact us within 100 days.
• Is financing available? Yes. Financing is available through Affirm at checkout — payments as low as 0.00% APR for qualified buyers, with 3, 6, or 12-month plans.
• Can I customize the camper? Contact OPENROAD's customer service team for customization inquiries and options.

Warranty

OPENROAD MANUFACTURER'S WARRANTY

The OPENROAD Integrated Aluminum Camper is backed by OPENROAD's manufacturer warranty covering defects in materials and workmanship. Warranty extends to the original purchaser. Contact Recon Recovery to initiate a warranty claim.