2024–2027 TOYOTA TACOMA – BODY ARMOR 4X4 PRO SERIES II REAR BUMPER WITH MODULAR SWING-OUT CAPABILITY, INTEGRATED SHACKLE RECOVERY MOUNTS, OE SENSOR & BSM RETENTION & LIMITED LIFETIME WARRANTY

Upgrade the rear of your 4th-generation Toyota Tacoma with the Body Armor 4x4 Pro Series II Rear Bumper — a modular high-strength steel rear bumper engineered for serious overlanders and daily drivers who want aggressive styling, factory sensor retention, and a future-proof upgrade path. The Pro Series II's modular design accepts optional swing-out accessory arms and tire mounts (sold separately: TC-2966DS driver-side swingout, TC-2966PS passenger-side swingout, TY-2966 tire carrier with license plate holder) — buy the bumper now, add the swingouts and tire carrier when you need them. Modern OE-body-line contouring delivers an aggressive-yet-integrated look that works on everything from TRD Off-Road builds to Limited daily drivers. Integrated shackle recovery mounts accept standard D-rings, 2 LED pod cutouts support flush-mount or standard pod lighting, and the bumper retains the OE receiver, OE sensors, and Blind Spot Monitoring (BSM) systems — critical for modern Tacomas equipped with factory safety tech.

Installation is pure Body Armor bolt-on — no drilling required and only about 1 hour install time with light mechanical skills. The two-stage light-texture black powder coat matches the Body Armor HiLine Front Winch Bumper (TC-19342) and Revo Series sliders (TC-4126/TC-4127) for a visually consistent Tacoma build. The bumper is backed by Body Armor's Limited Lifetime Warranty on the bumper and 3-Year Finish Warranty on the powder coat.

Specs

Features

• Modular Design (Future-Proof Upgrade Path): The Pro Series II's standout feature — accepts optional swing-out accessory arms and a tire carrier mount. Buy the bumper now, add the swingouts and tire carrier later as your build evolves. Compatible accessories:
  • TC-2966DS — Pro Series II Driver-Side Swingout
  • TC-2966PS — Pro Series II Passenger-Side Swingout
  • TY-2966 — Pro Series II Tire Carrier with License Plate Holder (also fits 2010-2024 4Runner)
• Aggressive Styling + OE Body Line Integration: Sleek design contours follow the factory body lines for a seamless, factory-integrated look that still reads as aggressive aftermarket upgrade. Modern aesthetic that works on street-focused SR5/TRD Sport and trail-focused TRD Off-Road builds alike.
• Integrated Shackle Recovery Mounts: Built-in recovery points accept standard 3/4" D-rings for strap-based recovery operations. Stronger than factory tow hooks for serious recovery scenarios.
• 2 LED Pod Light Fitment: Pre-engineered mounting locations for 2 LED pod lights or flush-mount lights. Perfect for backup lighting, work-truck duty, campsite illumination, and emergency scenarios. Lights sold separately.
• OE Receiver Compatibility: The bumper is engineered around your factory Class IV receiver hitch — you keep your full factory towing capability. No need to remove or replace the hitch.
• OE Sensor Compatibility — RARE FEATURE: Works with factory parking sensors on sensor-equipped Tacomas (Limited, Trailhunter, TRD Pro, and other sensor-equipped trims). Many aftermarket rear bumpers require sensor removal or awkward relocation — the Pro Series II works WITH your factory sensors.
• BSM Retention — CRITICAL FEATURE: Retains Blind Spot Monitoring systems that are standard or optional on modern Tacomas. BSM uses radar sensors mounted in or near the rear bumper area, and many aftermarket rear bumpers disable BSM functionality. The Pro Series II is engineered to preserve BSM — essential safety retention for daily-driver and highway use.
• Bolt-On Install — No Drilling Required: Standard Body Armor engineering philosophy. The bumper mounts to factory mounting points. No frame drilling, no cutting, no welding.
• ~1 Hour Install Time: One of the fastest rear bumper installs in the aftermarket — significantly faster than the HiLine Front Bumper's ~2 hour install.
• Two-Stage Light-Texture Black Powder Coat: Matches the Body Armor HiLine Front Winch Bumper (TC-19342), Revo Rock Sliders (TC-4127), and Revo Step Sliders (TC-4126) finish. Build a visually consistent Body Armor 4x4 Tacoma package.
• High-Strength Steel Construction: Welded steel delivers real-world rear-end protection against light impacts, backing-up incidents, and trail scrapes.
• Limited Lifetime Warranty + 3-Year Finish Warranty: One of the strongest warranty packages in the aftermarket steel bumper category.
• FREE SHIPPING on Orders $100+: Qualifies at the $1,100 price point.
• Affirm Financing Available: $1,100 can be financed at approximately $95/month for 12 months.

Fitment

FAQ

• What makes the Pro Series II different from Body Armor's other bumper series? The Pro Series II is characterized by:
  • Modular design — accepts optional swingouts and tire carrier (future-proof upgrade path)
  • OE sensor + BSM retention (critical for modern vehicles with safety tech)
  • Aggressive-but-integrated styling (follows OE body lines)
  • Rear-focused product line — Pro Series II is primarily a rear bumper + accessories series
    Other Body Armor series serve different purposes: HiLine = low-profile front bumpers, Revo = rock sliders, Ambush/Desert/Eco = different styling tiers.
• Does this fit my 2024-2027 Tacoma i-FORCE MAX Hybrid? Likely yes, but not explicitly addressed in the manufacturer's product listing. Unlike the Revo sliders (which explicitly EXCLUDE hybrids due to under-vehicle battery clearance), the rear bumper area is typically unaffected by the hybrid battery placement. Contact us before ordering to confirm hybrid compatibility if you have an i-FORCE MAX Tacoma.
• Will my factory parking sensors still work? Yes. The Pro Series II is specifically engineered to work with OE sensors for seamless integration. This is a key feature vs competitors — many aftermarket rear bumpers require sensor removal or awkward relocation.
• Will my Blind Spot Monitoring (BSM) still work? Yes. The Pro Series II retains Blind Spot Monitoring (BSM) systems. This is critical for daily-driver and highway use — BSM relies on radar sensors in the rear bumper area, and many aftermarket bumpers disable this functionality.
• Does this keep my factory tow hitch? Yes. The bumper is engineered to accommodate the original equipment Class IV receiver. You keep full factory towing capability.
• Can I add swing-outs and a tire carrier later? Yes — this is the Pro Series II's standout feature. The modular design accepts the compatible swingout and tire carrier accessories:
  • TC-2966DS: Driver-Side Swingout
  • TC-2966PS: Passenger-Side Swingout
  • TY-2966: Tire Carrier with License Plate Holder
    Buy the bumper now, add accessories as your build evolves.
• What size spare tire can the TY-2966 carrier hold? Varies by tire. Verify specific tire size compatibility with Body Armor 4x4 when ordering the tire carrier. Most Pro Series II tire carriers accommodate 33"-37" tires, which covers most 4th-gen Tacoma overland builds.
• Can I use the TC-2966DS/PS swingouts without the tire carrier? Yes — swingouts can be added independently. Common accessory loads: Rotopax water/fuel containers, high-lift jack mount, propane tanks, trash cans, awning mounts, LED lighting.
• Will the swingouts obstruct my rear hatch/tailgate opening? No — the swingouts are designed to swing out of the way for tailgate access. Verify specific tailgate clearance in the installation PDF.
• What LED lights fit the cutouts? The Pro Series II accepts 2 LED pods or flush-mount lights. Common options:
  • Baja Designs Squadron Sport ($170+ each)
  • Rigid Industries D-Series PRO ($200+ each)
  • KC HiLiTES Cyclone V2 ($100+ each)
  • Rough Country 3" Cree LED Cubes ($60-100 for pair)
  • Diode Dynamics SS3 ($180+ each)
    Lights sold separately.
• Do I need to drill my frame for installation? No. The Pro Series II mounts to factory mounting points — no drilling required.
• How long does installation take? About 1 hour with light mechanical skills. One of the fastest rear bumper installs on the market. The low install time reflects Body Armor's engineering focus on factory mounting points and bolt-on simplicity.
• What tools do I need? Standard automotive hand tools — socket set, ratchets, torque wrench. A helper is recommended for lifting the bumper into position (steel rear bumpers typically weigh 70-100 lbs).
• What's included in the box? (1) Pro Series II Rear Bumper, (1) Complete Mounting Hardware Kit (all necessary bolts, nuts, and washers for installation). Does NOT include: swingouts, tire carrier, D-rings, LED pods, or any additional accessories.
• What's the care and maintenance for the finish?
  • Clean with mild soap on a damp sponge ONLY
  • Periodically wipe down with a light coat of WD-40 to maintain luster
  • DO NOT apply polish or wax that requires buffing
  • DO NOT apply tire shine, glossy aerosol, or gel — can cause discoloration/bubbling
  • Owners in salt-belt states need annual inspection and finish maintenance
• What's the warranty? Body Armor 4x4 backs the Pro Series II Rear Bumper with:
  • Limited Lifetime Warranty on the bumper itself
  • 3-Year Finish Warranty on the two-stage light-texture black powder coat
    Note: competition use voids warranty. Finish warranty requires proper maintenance per care instructions.
• How does this compare to other 4th-gen Tacoma rear bumpers? The Pro Series II is positioned as a mid-tier modular rear bumper. Key differentiators vs competitors:
  • Modular design — not all competitors offer swingout upgrade paths
  • BSM + sensor retention — many competitors disable these safety features
  • OE receiver retention — some competitors replace the factory hitch
  • 1-hour install — faster than most competitors
  • Price — $1,100 is competitive mid-tier vs premium brands ($1,800-$3,500) and budget brands ($500-$800)

Warranty

Body Armor 4x4 backs the Pro Series II Rear Bumper with a Limited Lifetime Warranty against defects in materials and workmanship on the bumper itself. The bumper is covered for the life of the vehicle (original owner).

3-Year Finish Warranty covers the two-stage light-texture black powder coat finish against defects for 3 years from the date of purchase. The finish warranty requires proper maintenance per the care instructions — the finish must be cleaned only with mild soap on a damp sponge, periodically wiped with light lubricant (WD-40), and must NOT be treated with polish/wax requiring buffing or glossy coatings (tire shine, aerosol, gel). Surface rust, pitting, or discoloration from improper maintenance is NOT covered. In salt-belt and high-corrosion environments, rust or finish damage may occur without proper maintenance — owner is responsible for finish preservation.

⚠️ WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.